galvanizing plant spray OSU Hessler 300 A Push-Pull, anti-corrosion.
Our guns have no moving parts and components. The only components that are subject to wear are the contact tubes (nozzles) that they have a long-lasting because they are made of copper alloy "additive" resistant to high temperatures dell 'electric arc.
The light pisola (1.000 gr) and handy makes it less onerous work the operator resulting in increased productivity.
On the generator can be applied to a digital counter that detects the meters of thread consumed for a particular job.
The advancement of the wires is accurate, simultaneously equal and coordinated by an electric motor controlled by an electronic card which keeps constant the voltage and amperage determining an arc “calm”.
Possibility of arranging the picture of the display (A voltage Amper) in a place distant from the generator, allowing to control the remote process.
The rectifiers have a capacity that varies continuously from 15 a 400 barely, the 18 a 40 Volts, while the wire feed speed is regulated by a pressure gauge located on the generator.
Cables and flexible varying in length from 10 a 15 m with push-feeder placed on the generator and pull feeder on a trolley in place 3 m from the gun. The electrical connections of the cables and hoses are placed
outside of the generator and this facilitates the replacement operation.
The spraying can be performed, choice, with 2 system: "Open" and "closed" which can narrow or widen the spray cone according to the operator needs. The open system allows you to have a plot of the rougher coating, particularly suitable for applications: traction, locking and anti-slip.
Possible feed by means of reels or drums. The unwinder drums can be placed on the back of the generator or arranged at a distance according to the operator needs.
It may employ different diameters of wires from 1,45 a 2,5 mm. The two electric wires blend Arc determining the particles that are projected by a jet of compressed air (5,5-6 bars) at a speed of 100 m / second and deposited on the substrate to be coated, whose coverage varies from 12.7mm or 76.2mm per pass. The thickness deposited on each pass depends on the material to be sprayed and the heat supplied to the support, the distance of the gun and the operator's hand. The high temperature of the melted particles determines a better adhesion of the coating.
Technical features:
Splashes Zn dia 2,5 mm with a range of 15 m.
Components:
- Generator 300 A with AC coils or drums 250 Kg
- Light gun connected to the feeder with pull 3 m cable
- Pull feeder on wheels in sync with the push feeder mounted on the console or separate
- Push-feeder can be placed on the generator console or separate.
- 12 m cables and flexible between push-pull feeder and feeder-.
Maximum speed spray:30 Kg Zn / h
